Skip to main content

ecoAnchor - portable anchor

The second generation ecoAnchor mobile man anchor has all the key benefits of the original but with many new features and innovations. Due to the new manufacturing techniques of hot bonding with stitched and autoclave cured seams there are now no side walls allowing the empty bag to go completely flat.

The EcoAnchor is available only through our sole distributor, Checkmate Lifting & Safety Ltd, to find out more about the product CLICK HERE.


The ecoAnchor is a totally unique concept using renewable resources for both manufacture and installation. The ecoAnchor is constructed of a lightweight special natural rubber material that holds the bag in a solid form when filled with water. When installed the weight of the water in the ecoAnchor, combined with the friction generated from the rubber material, provides a secure freestanding anchorage. This can easily be installed without the need to carry steel weights traditionally required for this application. When empty, the ecoAnchor weighs just 11.4kg (25.1lb).


  • Dimensions 1.45m x 1.45m x 0.2m (4’9” x 4’9” x 8”) Nominal
  • Weight Empty = 11.4kg (25.1lb) Full = 400kg (882lb)
  • Pressure Loading 2.7kN/m2 (0.42lb/inch2)
  • Puncture Resistance Meets FED STD 191 part 1520
  • User Weight 100kg MAX
  • Roof Types EPDM, Mineral Felts, Concrete, metal deck, [Separate document for approved surfaces and angles available on request]


  • EN795:1996 Class E


  • Material Neoprene reinforced with Nylon

Fill & Drain Point

Combined filling and draining point with one way valve. Filler takes standard hose connectors.



Corner vent releases air when filling. When the valve releases water the ecoAnchor is ready to use.



Clear and concise labelling states the scope and limitations of use.


Watertight Seal

Hot bonded and autoclave cured seam around the edge ensures a watertight seal.


360 Degree Swivel

Attachment eye rotates 360 degree for correct orientation during use.


HLL Anchorage

Two ecoAnchors can be used as end anchors for a Checkmate temporary lifeline system by using either an HLL1 or HLL1W.



Empty the bag by unscrewing the drain cap. When almost empty, lift the bag to remove the remaining water.



Fold twice as shown in photo, carefully expelling any remaining air until flat.



Roll length ways until compressed into a small roll and secure with fitted straps.



Stow anchor back into its holdall for easy stowage and transportation.


ecoAnchor-Net Lifting Net

The ecoAnchor can be lifted when full if there are facilities to lift the ecoAnchor into a position with no water supply, or between different locations on site. A bespoke lifting net is available from Checkmate as a separate item, and is the only way to move an ecoAnchor when full. During the lift the pressure valve must be fitted with the supplied stopper, which must be removed before use.

Products: Industrial & Specialist Back to: ecoAnchor portable anchor

Thank you for your interest in ecoAnchor portable anchor

Please enter your email address to receive more information about ecoAnchor portable anchor.

Thank you for your interest in ecoAnchor

Please enter your email address to receive more information about ecoAnchor.

Health Equipment Documents All Other

Phone Email