Product

Inflatable hatch

Good air holding

New inflatable hatch seal for hatch covers

Checkmate Flexible Engineering has developed the new inflatable hatch seal for hatch covers, ’tween decks and dividers for use when bulk cargo contamination or loss has to be prevented.

The flexible, abrasion resistant tube is made from reinforced Nitrile/ PVC rubber which is highly resistant to water, ozone, sun and oil exposure. It also provides good air holding at high pressures.

More details

Construction
  • Heavily reinforced Nitrile/PVC rubber coating
  • Rubber valve permits insertion into narrow gaps
  • Working = 15 psig / 1.0 bar
  • Maximum = 150 psig / 10.0 bar
The company’s BS EN 9001 2015 quality assurance system is registered with SGS, a UKAS approved company.

Case Study

Submarine Gaiters

Checkmate developed effective, low-cost tooling and our very own test rig to dramatically reduce costs in mission-critical scenarios across Spain, Germany, Canada, Australia, New Zealand, and South Korea.

Case Study

Beach Recovery Vehicles

The Royal Marines’ BRV can be damaged if water enters above maximum wading depth. Checkmate designed and built flexible intake and out-take covers which can be quickly closed to protect the vehicle.

Case Study

Subsea Habitat Seal Development

Checkmate Flexible Engineering was approached to re-design seals for subsea habitats used on gas and oil pipelines.

Case Study

Setting the Standard

Case Study

Keeping Up The Pressure

Case Study

No Job Too Big

related products

Stowaway – marine fenders

Undersea habitat seals